EPIgeneous™ H3K4Me2 Cellular Assay Kit

H3K4Me2 Cellular assay for studying LSD1,LSD2, ASH1L, MLL, SET1A, SETD1A, SETD1B, SET7/9, SMYD3, JARID1A, JARID1B, JARID1C, JARID1D, JHDM1A and JHDM1B.

This cellular assay has been developed with optimized reagents and protocols for the direct detection of endogenous levels of H3K4Me2. HTRF® is a flexible assay format that enables you to use one kit for a variety of applications, without having to compromise on sensitivity. The H3K4Me2 assay can be used for adherent or suspension cells, primary or secondary screening, and inhibitor studies.

Assay Principle

This assay is designed for the simple, rapid and direct detection of endogenous levels of H3K4Me2 mark in cells. The dimethylation of Lysine 4 on histone H3 is detected in a sandwich assay format using 2 different specific antibodies, one labeled with Eu3+-Cryptate (donor) and the second with d2 (acceptor). When the dyes are in close proximity, the excitation of the donor with a light source (laser or flash lamp) triggers a Fluorescence Resonance Energy Transfer (FRET) towards the acceptor, which in turn fluoresces at a specific wavelength (665 nm). One conjugate binds to Histone H3 and the other binds to K4Me2, thereby generating FRET. The specific signal modulates positively in proportion to dimethylation on Lysine 4.

The assays can be run under a two-plate protocol. They can also be further streamlined to a one-step assay.

Two-plate assay protocol

Cells are plated (stimulated) and lysed in the same culture plate and then transferred to the assay plate for the detection of H3K4Me2 by HTRF reagents. This protocol enables the cells’ viability and confluence to be monitored.

One-plate assay protocol

Detection of H3K4Me2 with HTRF reagents is performed in a single plate used for plating, stimulation and detection. No washing steps are required. This protocol, HTS designed, allows miniaturization while maintaining HTRF quality.

Product Performance

1. Detection of H3K4Me2 on several derivated cancer cell lines

HTRF detection of H3K4Me2 mark was done using a two-plate assay protocol. Cells were seeded at various densities in a 96-well plate and incubated for 24 h before lysis. Lysates were then transfered to a 384-sv plate for detection.

To ensure operation in the linear range of the kit and to achieve an optimal S/B, cell densities have to be optimized.

2. Antibody Specificity

HeLa cells were seeded at a density of 15,000 cells per well in a 96-well plate for a 24 h incubation. Serial dilutions of Histone H3 derived peptides (from 10 µM down to xxx nM) with various epigenetic methyl marks were added to the detection well before the addition of HTRF detection conjugates. H3K4Me1 peptide competed with low affinity (IC50 = 1.08 µM), while the H3K4Me2 peptide competed with high affinity with the system leading to an IC50 value of 26.7 nM showing the specificity of the kit.

3. Measurement of the methylation of H3K4 induced by HDAC inhibitor

HeLa cells were seeded at 12,500cells per well in a 96-well plate, then treated overnight with TSA, NaB and Apicidine, 3 well known HDAC inhibitors that induce the di-methylation of H3K4 (H3K4Me2) and a decrease of H3K9Me2. (Histone deacetylase inhibitors stimulate histone H3 lysine 4 methylation in part via transcriptional repression of histone H3 lysine 4 demethylases - Mol pharmacol. 2011 Jan;79(1):197-206 Huang PH & al.). After lysis, lysates were transfered to a 384-sv plate for detection using a two-plate assay protocol.

4. Western Blot versus HTRF assay

Various concentrations of HeLa cells were grown in 96w plate at 37°C, 5% CO2 for 16 hours, with and without 10 µM TSA. After medium removal, the cells were lysed with Supplemented lysis buffer C. Each cell concentration was dispensed and analyzed side-by-side by Western Blot (sample vol = 13 µL) and by HTRF EPIgeneous H3K4Me2 assay (sample vol =10 µL).

By using HTRF EPIgeneous H3K4Me2 assay only 2,000 cells are sufficient for minimal signal detection, while 6,000 cells are needed for a Western Blot signal.

Part#, inserts & MSDS

Ordering Info

DescriptionCat. noProduct insertMSDS
H3K4Me2 cellular assay - 10,000 tests62KA2PAD
-
H3K4Me2 cellular assay - 500 tests62KA2PAE

Companion products

DescriptionCat. noProduct insertMSDS
Epigeneous lysis buffer C - 500 tests62EL3FDD
-
Epigeneous lysis buffer C - 10,000 tests62EL3FDH
-
H3K4Me2 cellular control lysate62KA2TDA
-
-

ドキュメント